The X431 not only comes with a docking station it also comes with the Connector Smartbox v3.0 - a diagnostics box developed by Launch to support multiple communication models (USB, BT, WIFI), DoIP and multiple diagnostics protocols including J2534. The Smartbox v3.0 supports DoIP functions, as the user is operating the device the software switches to the DoIP mode automatically for any vehicle that requires diagnosis over internet protocol. The device also automatically switches between DoIP and normal diagnosis without user action needed for even faster vehicle diagnosis.
The Eurotab II comes fully integrated with:
HaynesPro WorkshopData 'Electronics' package. When you find an error code you can click on it, right there on your tool, and go straight to the HaynesPro solution.
LAUNCH X431 EUROTAB II KEY FEATURES:
Fuse and relay box locations and overview
Wiring diagrams for Engine, ABS, ESP and air conditioning
Component locations and information
Fault codes (manufacturer and EOBD)
Ground point locations
EOBD connector location
Control unit locations
Battery disconnection/reconnection procedures
High-voltage circuit deactivation procedures
Wiring diagrams covering e.g. door locks, windows, airbags, exterior lights, starting/charging and wash/wiper systems
Highlight functionality to trace corresponding wires and components.
J2534 Pass-through integrated for online programming
Using J2534 functions requires users to download the corresponding tool installation package on our website. Users can purchase O.E. diagnostic software and use their online subscription with the X431 Euro Tab II and Smartbox v3.0.
J2534 O.E.M Supported Software
Toyota/Lexus original software Techstream test
GM original software General Motors GDS2
Honda/Acura original software HDS (Honda Diagnostics System) test
Volkswagen/Audi original software ODIS test off board Diagnostic Interface Configuration.
Land Rover/Jaguar Land Rover/JLR original software SDD text
VOLVO original software VIDA test Vehicle Information & Diagnostics
Subaru original software SSM4 test
Specifications:
Android 2.0Ghz Eight Core CPU
10.1" Touch Screen
4GB RAM
64GB Solid State Hard Drive supporting up to 128GB SD
Wi-Fi, Bluetooth 4.0, Ethernet, HDMI, USB
13.0 mega pixel rear camera
8.0 mega pixel front camera
9360mAh lithium Ion battery
Docking station with charging point
Smartbox Features:
Programmable control access & disconnection of CAN system
Supports both passenger car & HD communication protocol
Supports random switching between WiFi hotspot mode and network card modes: USB Bulk, USB to serial port, USB to Ethernet port
Supports 12V and 24V systems (24v only with an optional HD box)
Supports SAE J2534-1 and SAE J2534-2
Supports RP1210/C
Launch X431 Eurotab II Professional Diagnostic Tool
- Product Code: EuroTab-II
- Brand: Launch
- Product Code: EuroTab-II
- Availability: In Stock
£3,953.00
The X431 not only comes with a docking station it also comes with the Connector Smartbox v3.0 - a diagnostics box developed by Launch to support multiple communication models (USB, BT, WIFI), DoIP and multiple diagnostics protocols including J2534. The Smartbox v3.0 supports DoIP functions, as the user is operating the device the software switches to the DoIP mode automatically for any vehicle that requires diagnosis over internet protocol. The device also automatically switches between DoIP and normal diagnosis without user action needed for even faster vehicle diagnosis.
The Eurotab II comes fully integrated with:
HaynesPro WorkshopData 'Electronics' package. When you find an error code you can click on it, right there on your tool, and go straight to the HaynesPro solution.
LAUNCH X431 EUROTAB II KEY FEATURES:
Fuse and relay box locations and overview
Wiring diagrams for Engine, ABS, ESP and air conditioning
Component locations and information
Fault codes (manufacturer and EOBD)
Ground point locations
EOBD connector location
Control unit locations
Battery disconnection/reconnection procedures
High-voltage circuit deactivation procedures
Wiring diagrams covering e.g. door locks, windows, airbags, exterior lights, starting/charging and wash/wiper systems
Highlight functionality to trace corresponding wires and components.
J2534 Pass-through integrated for online programming
Using J2534 functions requires users to download the corresponding tool installation package on our website. Users can purchase O.E. diagnostic software and use their online subscription with the X431 Euro Tab II and Smartbox v3.0.
J2534 O.E.M Supported Software
Toyota/Lexus original software Techstream test
GM original software General Motors GDS2
Honda/Acura original software HDS (Honda Diagnostics System) test
Volkswagen/Audi original software ODIS test off board Diagnostic Interface Configuration.
Land Rover/Jaguar Land Rover/JLR original software SDD text
VOLVO original software VIDA test Vehicle Information & Diagnostics
Subaru original software SSM4 test
Specifications:
Android 2.0Ghz Eight Core CPU
10.1" Touch Screen
4GB RAM
64GB Solid State Hard Drive supporting up to 128GB SD
Wi-Fi, Bluetooth 4.0, Ethernet, HDMI, USB
13.0 mega pixel rear camera
8.0 mega pixel front camera
9360mAh lithium Ion battery
Docking station with charging point
Smartbox Features:
Programmable control access & disconnection of CAN system
Supports both passenger car & HD communication protocol
Supports random switching between WiFi hotspot mode and network card modes: USB Bulk, USB to serial port, USB to Ethernet port
Supports 12V and 24V systems (24v only with an optional HD box)
Supports SAE J2534-1 and SAE J2534-2
Supports RP1210/C
